Concrete Floor Paint Anti Slip 5Ltr For Hard Wearing Wood And Metal Flooring
Our unique formula in view of a mix of ceramic,'diamond hard' wax and polyurethane resin, has created a 'Best in Class' single pack paint for general utilize. Concrete Floor Paint Anti Slip gives a decent level of slip protection and the counter slip particles are pre-mixed which makesit simpler to accomplish a uniform wrap up.
All grades now convey and have amazing test comes about for scraped area, scratch and effect protection, and additionally for bond, hardness and adaptability.
The sum total of what tests have been embraced to ISO standard where appropriate, and showed this 'Best Ever Formulation' to be four times more scratch safe than already, twice as hard wearing and with half enhanced bond.
This alluring, hardwearing covering is anything but difficult to apply and dries rapidly to give a low support, extreme, oil safe wrap up. For regions where an Anti Slip form isn't required Concrete Floor Paint is prescribed. To help camouflage defects in the floors surface we suggest Matt Concrete Floor Paint, which lessens reflection and glare at first glance. Both convey an indistinguishable advantages from Concrete Floor Paint Anti Slip without the additional estimation of slip protection.
1. Appearance satin
2. Delivery Time (Days) standard
3. Primer Required no
4. Usage - Interior / Exterior interior
5. Usage - Suitable for bare or painted concrete, wood and metal
6. Usage - Properties hard wearing, slip resistant, economical, easy to apply, fast drying, oil resistant
7. Usage - Surfaces floor
8. Max Operational Temp (deg C) 60
9. Coverage (m² per litre/kg) 8
10.Application - Drying time (hours) 12 at 15 degrees
11.Application - Recommended Coats 2
Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Etch & Clean. Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavierdeposits of oil and grease we recommend Concroff, again, flush with clean water and allow the surface to dry.
New Concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.
Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Powerfloat Primer.
Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Bio D can be used to remove grease and oil from painted surfaces. Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).
APPLICATION: The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours), and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.
SAFETY: Concrete Floor Paint is flammable and should be used in a well ventilated area. In common with all non-porous decorative finishes, the surface can become slippery under certain conditions. All product labels provide general safety information. Material Safety Data Sheets are available. Food products must be removed from the area during application and drying process.