Firproof Paint Wallcoat Class B System For Interior Ceiling And Walls

Firproof Paint Wallcoat Class B System For Interior Ceiling And Walls

Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.

Pack Contents:

25m² Pack = 1 x 25m² Wallcoat + 1 x 25m² Wallcoat Smoke & Flame Retardant Topcoat
100m² Pack = 1 x 100m² Wallcoat + 1 x 100m² Wallcoat Smoke & Flame Retardant Topcoat
Specification (Interior Use Only)

Inspect and prepare in accordance with manufacturer’s instructions and apply -

1 coat of Thermoguard Wallcoat
1 coat of Thermoguard Wallcoat Smoke & Flame Retardant Topcoat
2 coats of Thermoguard Wallcoat Smoke & Flame Retardant Topcoat may be required for strong/dark colours - To aid topcoat opacity Thermoguard Wallcoat can be tinted to undercoat shades if required at no extra cost - please call if required.

For 30 & 60 minute protection please see Thermoguard Wallcoat 30 & 60 Minute Protection System Packs

Fire Testing & Certification:

Tested at UKAS Fire Test Laboratory -

Achieved BS EN Class B s1 d0
Thermoguard issue a Fire Certificate upon request for each correctly specified project for Insurance, Fire and Building Authority and Client Records against proof of purchase. Certified Fire protection is guaranteed if all instructions are followed on suitable surfaces.

Preparation:

Surfaces should be sound and firmly adhering, clean, dry and free of surface contamination. Remove loose, flaking or suspect paint films and adequately abrade existing smooth or hard coatings – abrasion not needed on Vinyl Matt.

Application & Conditions:

Apply by brush or roller, thinning to a maximum 5% with water, provided specified spread rate is achieved. Maintain wet edge during application.

During application and drying, ensure a minimum temperature of 5°C, maximum relative humidity 75% and surface temperature at least 3°C above dew point. Avoid condensation.

 

Write a review

Note: HTML is not translated!
    Bad           Good

Firproof Paint Wallcoat Class B System For Interior Ceiling And Walls

  • Product Code: st61
  • Availability: In Stock
  • £133.19
  • Ex Tax: £110.99

Available Options