Industrial Floor Paint For Heavy Duty Factories And Barns 20ltr
Formulated with a hardwearing, durable air drying resin for professional usage anywhere from a domestic garage to an industrial warehouse. As industrial painting contractors, we use these products ourselves.
Excellent mechanical & chemical resistance
Ideal for brick, concrete, metal & wooden surfaces
Garages & Test Centres
Kennels & Catteries
Boats - Anti-slip aggregate available (see below.
Regal Acid Etch Cleaner & Degreaser
Regal Concrete Floor Sealer
Regal Heavy Duty Line Marking Paint
Regal Industrial Thinner
Regal High Opacity Masonry Paint
If we don't have stock in the branded tins, we will send the same product in unbranded, plain white tins. Please note, this will still be the same product.
Colours - Colour Chart Link:
Colours shown are for guidance only as the appearance can vary between computer screens.
Click on the link above to see RAL and British Standard colour charts.
If you can't find the colour you want, please contact me (see Seller Information below) to discuss your requirement.
The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion or drying.
New concrete floors should be cured with a suitably low moisture content.
Power floated floors should be etched or blast-tracked (see below for concrete etching solution).
Thinner (see separate listing) may be added if necessary (eg. in low temperatures when the paint is thicker).
Thoroughly mix the paint (and thinner). An electric drill with stirrer attachment is recommended.
Brush or roller.
Coverage - 5-8m² / Ltr depending on the porosity and texture of the surface.
Two coats recommended. Concrete sealer also available (see below).
Apply in thin coats and well ventilated conditions to give a good drying cycle.
Touch dry - 3 hrs
Recoatable / Hard dry - 16 hrs